1、2013年毕业于西北工业大学材料学院，获工学博士学位。近年来参与了国家自然科学基金重点项目、国防预研项目、航天基金项目、重庆市集成示范计划项目等课题的研究。目前主持国家自然科学基金青年基金，皇家永利教育厅自然科学项目和西南石油大学科研启航计划项目等。

2、致力于金属以及无机非金属之间的扩散连接和钎焊研究。研究范围既包括同种材料的连接，也包括异种材料的连接，如复合材料的连接、复合材料与高温合金以及钛合金的连接等。同时，

3、长期从事碳基复合材料的设计与制备、表面处理与改性、成形与加工等方面的研究。

4、已在国内外学术期刊和会议上发表论文30余篇，其中SCI收录20余篇，为Materials Science and Engineering: A、Journal of Alloys and Compounds等期刊审稿人。

1、先进材料的连接工艺及机理 

2、复合材料和构件的制备及成形

3、表面科学与工程

4、材料成形数值模拟

1、代表性项目

（1）C/C复合材料与Ti3Al基合金TLP扩散连接多界面设计、组织结构演变及应力缓解机理研究，国家自然科学基金青年基金

（2）铝蜂窝板与1Cr11Ni2W2MoV不锈钢钎焊接头成分设计、界面演变及连接机理研究，皇家永利教育厅自然科学项目

2、代表性成果

（1）Wang Jie*, Feng Yang, Zhang Fuqi, Xiong Qinglian, Xiong Yanlin, Yang Haotian, Xiong Qinghai.  Microstructure and mechanical property of SiC whisker coating modified C/C composite/Ti2AlNb alloy dissimilar joints prepared by transient liquid phase diffusion bonding[J]. Ceramics International, 2020, 46(5): 5937-5945.

（2）Wang Jie*, Xiong Qinglian, Wang Jun, Xiong Yanlin, Yang Jin, Zhang Fuqi. Microstructure and mechanical properties of YG8/IN718 alloy joints prepared by vacuum brazing [J]. Vacuum, 2019, 169: 108942.

（3）Jie Wang*, Yanlin Xiong, Hao Li,Guanzhong Yang,Fuqi Zhang, Qinglian Xiong,Yang Feng, Haotian Yang. Effects of bonding temperature on the microstructures and mechanical properties of the C/C-Cf/SiC composite joint prepared by in situ hot-press diffusion bonding using Ti–Si–C compound as interlayer[J]. Materials Research Express, 2019, 6(11)

（4）Wang Jie*, Feng Yang, Li Hao, Yang Jin, Yang Haotian, Zhang Fuqi. Microstructure and mechanical properties of TC4/0Cr18Ni9 joint prepared by transient liquid phase diffusion bonding [J]. Materials Research Express, 2019, 6(10)

（5）王杰*,熊清莲,熊宴邻,张富淇,杨锦.瞬间液相(TLP)扩散连接 GH4169/TC4 接头的微观结构及力学性能[J].稀有金属材料与工程,2019,48(04):1275-1280.

（6）Wang Jie*, Yang Guanzhong, Zhang Fuqi, Xiong Yanlin, Xiong Qinglian. The preparation and mechanical properties of carbon/carbon (C/C) composite and carbon fiber reinforced silicon carbide (Cf/SiC) composite joint by partial transient liquid phase (PTLP) diffusion bonding process [J]. Vacuum, 2018, 158: 113-116.

（7）Li Kezhi*, Wang Jie, Ren Xiaobin, Li Hejun, Li Wei, Li Zhaoqian. The preparation and mechanical properties of carbon-carbon/ lithium-aluminum-silicate composite joints [J]. Materials undefinedamp; Design, 2013, 44, 346-353.

（8）Wang Jie, Li Kezhi*, Li Hejun, Li Wei, Li Zhaoqian, Guo Lingjun. Partial transient liquid phase bonding of carbon/carbon composites using Ti-Ni-Al2O3-Si compound as interlayer [J]. Journal of Alloys and Compounds, 2013, 550, 57-62.

（9）Wang Jie, Li Kezhi*, Li Wei, Li Hejun, Li Zhaoqian, Guo Lingjun. The preparation and mechanical properties of carbon/carbon composite joints using Ti-Si-SiC-C filler as interlayer [J]. Materials Science and Engineering: A, 2013, 574, 37-45.

（10）Wang Jie, Li Kezhi*, Song Xinrui, Guo Lingjun, Li Wei, Li Zhaoqian. The study on joining carbon/carbon composites using Ti-Ni-Si compound [J]. Materials Science and Engineering: A, 2012, 547 (15), 12-18.